Key Financial Ratios for Evaluating Business Performance: A CFO's Guide for Indian Founders

Key Financial Ratios for Evaluating Business Performance: A CFO's Guide for Indian Founders

Summary

• Financial ratios for business performance only work when read in pairs. A single ratio, read alone, hides more than it shows.

• Nine ratios cover most Indian MSMEs and funded startups: EBITDA margin, net margin, ROCE, ROE, DSO/DIO/DPO (cash conversion cycle), OCF-to-EBITDA, current ratio, debt-equity and DSCR/interest cover.

• Since FY 2021-22, Schedule III requires companies to disclose 11 ratios and explain any that move by more than 25%. Use that as the floor, not the ceiling.

The financial ratios that tell you how your business is really performing are the ones that connect profit to cash and return to risk: ROCE, the cash conversion cycle, operating cash flow to EBITDA, debt-equity and DSCR, read alongside your margins. Revenue growth and net profit tell you what happened. Ratios tell you whether it was worth it, and whether you can afford to keep doing it.

Most founders already know what a current ratio is. If you need the definitions, our easy guide to financial ratios and Financial Ratios 101 cover them. This guide is about something different: how to use financial ratios for business performance evaluation the way a CFO does in a monthly review, with India-specific benchmarks and a worked example where a "good year" turns out to be a warning.

Why do single financial ratios mislead founders?

Because every ratio can be improved by damaging another one. Net margin rises if you cut marketing. The current ratio rises if customers stop paying (receivables pile up as "current assets"). ROE rises if you borrow more. Each looks like progress on its own.

A CFO therefore never reads a ratio alone. We read pairs, where one ratio checks the other:

What you want to knowRatio A (the headline)Ratio B (the check)What a bad pair looks like
Is growth profitable?EBITDA margin / net marginROCEMargin flat, ROCE falling: growth is eating capital
Is profit turning into cash?EBITDAOperating cash flow ÷ EBITDA; cash conversion cycleEBITDA up, OCF negative: profit is stuck in debtors and stock
Are returns real or borrowed?ROEDebt-equityROE steady only because debt rose
Can you carry your debt?Current ratioDSCR / interest coverageCurrent ratio "fine", DSCR sliding toward 1.25

Four pairs, nine ratios. That is the whole cockpit for most ₹10–200 Cr businesses. The question is what "good" looks like in India.

What are the key financial ratios, and what is a good number in India?

Benchmarks vary by sector, so treat these as working ranges for a review, not pass marks. Where a number comes from a lender norm or RBI data, the source is named.

RatioFormulaWorking range / benchmarkSource of the benchmark
EBITDA marginEBITDA ÷ revenueSector-specific; compare with your own trend and peersYour MIS + peer filings
Net profit ratioPAT ÷ revenueSector-specific; a fall of more than 25% needs explanation in the notesSchedule III
ROCEEBIT ÷ (net worth + total debt)Should sit comfortably above your borrowing costCFO rule; see below
ROEPAT ÷ average net worthRead only with debt-equitySchedule III ratio
Cash conversion cycleDSO + DIO − DPO (days)Trend matters most; MSME suppliers must be paid within 45 days where agreedMSMED Act, 2006, Sec 15
OCF ÷ EBITDAOperating cash flow ÷ EBITDAConsistently below ~60–70% = profit not convertingCFO rule of thumb
Current ratioCurrent assets ÷ current liabilitiesMinimum about 1.33 under Tandon Method II; 1.5–2.0 is comfortableBank working-capital norms; Tally Capital
Debt-equityTotal debt ÷ net worthLower is safer; lender thresholds vary by sectorBank credit policy
DSCR(PAT + depreciation + interest) ÷ (interest + principal due)About 1.25 or higher; below 1.0 is a red flagLender practice (Tally Capital)
Interest coverageEBIT ÷ interestListed manufacturers: 10.2x in Q1 FY27; non-IT services 2.6x; below 1 is not viableRBI, 27 Aug 2026

Two notes a generic list will not give you.

First, the current ratio benchmark in India is a bank formula, not a theory. Under the Tandon Committee's second method, the borrower funds at least 25% of total current assets from long-term sources, which works out to a minimum current ratio of 1.33:1. If yours falls below that, expect your cash credit limit to be reassessed, whatever your profit.

Second, ROCE matters more than ROE for a growing private company. ROE can be propped up with debt. ROCE cannot. If your ROCE is only a few points above what the bank charges on your cash credit line, each extra rupee of borrowed growth adds little to shareholder value and a lot to risk.

So far this is theory. Here is what it looks like when a business has a "great year".

How to analyse company performance using ratios

Vardhan Polymers Pvt Ltd  makes injection-moulded components in Pune. FY26 looked like a breakthrough: revenue up 25% from ₹52 Cr to ₹65 Cr, two new OEM customers, EBITDA up from ₹6.8 Cr to ₹7.8 Cr. The founder's question was simple: should we push for 30% growth next year?

The P&L view (all ₹ Cr)

FY25FY26
Revenue52.065.0
EBITDA6.87.8
Depreciation1.21.5
Interest1.11.9
PAT (at 25.17% tax)3.373.29
Receivables / inventory / payables9.5 / 7.0 / 6.015.0 / 10.5 / 7.0
Net worth / total debt20.0 / 11.023.3 / 19.0

The ratio view (closing balances, kept simple for illustration; use averages in your own pack)

RatioFY25FY26ChangeReading
EBITDA margin13.1%12.0%−1.1 ptsNew OEM pricing is thinner
Net profit ratio6.5%5.1%−22%Interest is absorbing growth
ROCE18.1%14.9%−18%₹11.3 Cr more capital earned only ₹0.7 Cr more EBIT
ROE16.8%14.1%−16%Falling despite more leverage
DSO / DIO / DPO (days)67 / 70 / 6084 / 84 / 56OEMs pay slower; stock built for them
Cash conversion cycle77 days112 days+35 days₹8 Cr extra tied up in working capital
OCF ÷ EBITDApositiveabout −17%OCF ≈ 7.8 − 1.1 tax − 8.0 WC = −₹1.3 Cr
Current ratio1.541.40−9%Still above 1.33, but close
Debt-equity0.550.82+49%Growth funded by the bank
Interest coverage5.1x3.3x−35%
DSCR2.181.72−21%Still above 1.25, falling fast

What the ratios say that the P&L did not. Every rupee of FY26 growth was financed by borrowing. Operating cash flow was negative, so capex of about ₹5.6 Cr, interest and the cash shortfall were all covered by ₹8 Cr of new debt. Another year of 30% growth on the same terms would push the current ratio below 1.33 and the DSCR toward the 1.25 lender threshold, which is exactly when a bank tightens a limit.

The CFO decision. Growth was not the problem. Terms were. Vardhan renegotiated OEM payment terms from 90 to 60 days for the next contract cycle, moved two slow SKUs to make-to-order and repriced one OEM contract for resin pass-through. If DSO returns to 67 days and DIO to 70, about ₹4.8 Cr of cash is released at FY26 revenue, close to a full year of capex.

If your MIS shows profit but your bank balance disagrees, this is the gap a virtual CFO closes first. Talk to us about a ratio review on your last two years.

The example raises an obvious question: shouldn't the statutory ratios have caught this?

Do Schedule III ratios tell you enough? (No, and here is why)

Since FY 2021-22, the MCA's amendment to Schedule III of the Companies Act, 2013 (notified 24 March 2021) requires companies to disclose 11 ratios in their financial statements and to explain any ratio that changes by more than 25% from the previous year. The 11 are: current ratio, debt-equity, DSCR, return on equity, inventory turnover, trade receivables turnover, trade payables turnover, net capital turnover, net profit ratio, ROCE and return on investment.

That disclosure is useful, and your auditor will ask about it. But look at Vardhan Polymers: only one of the 11 ratios (debt-equity, +49%) crossed the 25% threshold. Net profit ratio fell 22%, DSCR 21%, receivables turnover about 21%. None triggered an explanation. Meanwhile, the business went cash-negative.

Three reasons the statutory set is not enough for running a business:

  • It is annual. By the time you sign the accounts in September, the problem is 18 months old. A CFO tracks the same ratios monthly in the MIS.
  • It has no cash ratio. None of the 11 measures operating cash flow against profit. OCF ÷ EBITDA is the single most useful addition.
  • 25% is a blunt line. Several ratios each sliding 15–22% in the same direction is a stronger signal than one ratio moving 30%.

Treat Schedule III as the floor. Which leads to the mistakes we see most often when founders build their own ratio pack.

When ratio analysis breaks: 6 common mistakes

  1. Using closing balances in a growing business. If revenue grows 25%, year-end receivables overstate DSO. Use average balances, or monthly DSO on a rolling 90-day revenue base.
  2. Comparing with the wrong peer. A contract manufacturer and a branded player should not share a margin benchmark. Compare with your own three-year trend first, then with 3–5 real peers from MCA filings.
  3. Ignoring the MSME 45-day rule in DPO. Stretching payables to Micro and Small suppliers beyond 45 days (MSMED Act, Sec 15) improves DPO on paper but creates interest liability and an income-tax disallowance risk. Read DPO with your supplier mix.
  4. Reading ROE without debt-equity. A rising ROE with rising leverage is a risk report, not a performance report.
  5. Mixing GST into revenue. Ratios built from bank credits or GST-inclusive invoices overstate turnover and understate DSO. Build from the books, net of GST.
  6. Ratios without owners. A ratio nobody is accountable for does not move. DSO belongs to sales, DIO to operations, DPO to purchase, and ROCE to the founder.

When ratio analysis is overkill (the counter-case)

Not every business needs a nine-ratio pack every month.

  • Pre-revenue or very early startups: ratios on tiny numbers are noise. Track burn, runway and cash on hand instead (see our burn rate calculator).
  • Asset-light SaaS before scale: ROCE and current ratio say little. Unit economics and the operating KPIs in our CFO KPI guide matter more.
  • Stable businesses under ₹10 Cr with no debt: a quarterly look at margin, DSO and cash is usually enough, and your CA can do it.

The full pack earns its keep once you carry bank debt, hold meaningful inventory or receivables, or are preparing to raise money.

How to build a monthly ratio review in 5 steps

  1. Close the books by day 10. Ratios on unreconciled numbers are worse than none. Reliable outsourced accounting and MIS is the foundation.
  2. Pick your pairs. Start with the four pairs above. Add one sector ratio (for example, revenue per billable FTE for services, or yield for manufacturing).
  3. Set a working range and a trigger for each. Example: DSO 60–70 days; review if above 75 for two months.
  4. Show 13 months, not one. Trends beat snapshots. Put the Schedule III 11 in the same sheet so year-end disclosure is a copy-paste.
  5. End every review with one decision. "DSO is 84 days" is information. "We move OEM terms to 60 days at renewal" is management.

How Jordensky helps

Jordensky works as the outsourced CFO for Indian MSMEs and funded startups. For ratio analysis, that means we close the books, build the monthly ratio pack with your working ranges, explain movements before your auditor or banker asks, and turn each review into a decision on pricing, terms, inventory or funding. For manufacturers and MSMEs that usually starts with working capital; for startups it starts with cash conversion and investor reporting.

If you want a second opinion on what your last two years of ratios are telling you, book a conversation with a Jordensky CFO.

Disclaimer: This article is general information for business owners and is not professional accounting, tax, legal or lending advice. Ratio benchmarks vary by sector and lender. Consult a qualified professional before acting on it.

References

  • Reserve Bank of India, "Performance of Private Corporate Business Sector during Q1:2026-27", Press Release 2026-2027/974, 27 August 2026 (3,247 listed non-government non-financial companies; manufacturing ICR 10.2, non-IT services ICR 2.6; ICR minimum of 1 for viability).
  • Ministry of Corporate Affairs, notification amending Schedule III to the Companies Act, 2013, 24 March 2021, effective 1 April 2021 (Additional Regulatory Information: 11 ratios, explanation for change of more than 25%). Summary: Taxmann, "Mandatory requirement for disclosure of accounting ratios in the financial statements".
  • Tally Solutions, "Working Capital Assessment Methods" (Tandon Method II: 25% of current assets from long-term funds; minimum current ratio 1.33:1; Nayak Committee 25% of turnover for MSE limits up to ₹5 Cr).
  • Tally Capital, "Key lending ratios banks check" (DSCR 1.25 or higher; current ratio 1.5–2.0).
  • Micro, Small and Medium Enterprises Development Act, 2006, Section 15 (payment to micro and small suppliers within the agreed period, not exceeding 45 days).

Frequently asked questions

What are the most important financial ratios for evaluating business performance?

For most Indian MSMEs and funded startups, nine ratios cover it: EBITDA margin, net profit ratio, ROCE, ROE, the cash conversion cycle (DSO + DIO − DPO), operating cash flow to EBITDA, current ratio, debt-equity and DSCR or interest coverage. Read them in pairs (margin with ROCE, EBITDA with cash conversion, ROE with debt-equity, current ratio with DSCR) so one ratio checks the other.

What is a good current ratio for an Indian company?

Banks in India typically expect a minimum of about 1.33:1, which comes from the Tandon Committee's second method of working-capital assessment (the borrower funds 25% of current assets). A range of 1.5 to 2.0 is generally considered comfortable. A very high current ratio is not automatically good: it can mean receivables or inventory are piling up.

How do you analyse company performance using ratios?

Compare each ratio with your own trend over at least 13 months and with a few genuine peers, not a textbook number. Pair profitability ratios with cash and risk ratios, find where they disagree, and trace the gap to an operating cause such as customer terms, stock levels or pricing. Finish each review with a decision and an owner.

Which ratios must companies disclose under Schedule III?

Since FY 2021-22, Schedule III of the Companies Act, 2013 requires 11 ratios: current ratio, debt-equity, debt service coverage, return on equity, inventory turnover, trade receivables turnover, trade payables turnover, net capital turnover, net profit ratio, return on capital employed and return on investment. Any ratio that changes by more than 25% from the previous year needs an explanation in the notes.

What is the difference between ROCE and ROE?

ROCE measures operating profit (EBIT) against all capital used, debt and equity. ROE measures profit after tax against shareholders' equity only. ROE can rise simply because a company borrows more, so for a private business that uses bank funding, ROCE is the better test of whether growth is creating value.

What DSCR do banks look for?

Lenders commonly look for a DSCR of about 1.25 or higher, meaning operating cash available covers interest and principal due with a 25% buffer. A DSCR below 1.0 means the business cannot service its debt from operations. Exact thresholds vary by bank and loan type, so check your sanction letter for covenants.

How often should a founder review financial ratios?

Monthly, as part of the MIS review, once the business has bank debt, meaningful working capital or investors. Early-stage startups and small debt-free businesses can review quarterly and focus on cash, burn and margin.

Can a company with good profit ratios still run out of cash?

Yes. If receivables and inventory grow faster than profit, operating cash flow can turn negative even while margins look healthy. That is why operating cash flow to EBITDA and the cash conversion cycle belong in every ratio pack.

Written by

CA Akash Bagrecha

Co-Founder

Chartered Accountant with deep expertise of helping growing companies with CFO led advisory and has helped more than 120+ business with financial advisory role.